Omega Pro 2 / OP2 4400-840 CKIT+ MPT E3D Q600

92917494

Change configuration

  • Base: 92917494 — OP2 4400-840 CKIT+ MPT E3D Q600
  • Optic: SPOT: spot emergency optic

Data Sheet

A recessed/surface/suspended, edge-lit LED luminaire. LED driver, DALI-2 dimmable with 3 hour, Self/DALI Addressable test, emergency lighting circuit. Class II electrical (this product is not earthed), IP40_IP20, Impact strength: IK03. Body: steel sheet, finished white (close to RAL9016). Diffuser: UV-stabilised polycarbonate microprismatic optic for maximised spacing with central control pod hole. Electrical connection via 7 pole piano key terminals, loop-in/loop-out possible. Complete with 4000K LED, Colour Rendering Index min.: 80



Dimensions: 597 x 597 x 57 mm
Luminaire input power: 35 W
Luminaire luminous flux: 4450 lm
Luminaire efficacy: 127 lm/W
Weight: 5.87 kg

Equipped with:

  • Optics polycarbonate lens for spot emergency lighting.
Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:4450 lm
  • Total emergency luminous flux:200 lm
  • Luminaire efficacy*:127 lm/W
  • Colour Rendering Index min.:80
  • Ballast 1:1 x 28000654 LCA 35W 150-700mA one4all lp PRE
  • Ballast 2:1 x 89800667 EM TR EM R2A NG CATS PRO E3
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L90 50000 h at 25 °C
  • Luminaire input power*:35 W Power factor = 0.97
  • Standby Power*:0.2 W
  • Charging power:2.2 W
  • Dimming:Dali2Dim dimmable to 10%
  • LED
  • CE
  • Einb_NDaeMat
  • ENEC11
  • GLedReP
  • 650°
  • IK03
  • IP40_IP20
  • LLedNr
  • RG0
  • SC2
  • Ta=0°C_to_+35°C

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)