Aquaforce Pro / AQFPRO S LED5200-840 PC WB MWBM


Data Sheet

An IP66, dust and moisture resistant LED luminaire. Luminaire with motion sensor and BM (wireless interface DALI / DALI-2 to Bluetooth® Mesh 1.0 (Bluetooth® 4.x). With wide beam distribution. Class I electrical. Canopy: light grey polycarbonate. Diffuser: high transmission opal polycarbonate with refraction prisms. Patented snap-on mechanism EasyClick for clipless mounting of diffuser. For surface or suspended mounting. Quick-fix brackets supplied for surface mounting. Suitable for ceiling or wall (both vertically and horizontally). Mounting kits for conduit, chain suspension and catenary suspension are available as accessories. Suitable for through wiring with H05VV or NYM cable (rated 10A). Equipped with presence detector and daylight harvesting function for dimming control plus slaves via bluetooth. ambient temperature: -20°C to +33°C. Complete with 4000K LED..

Radio definition: Wireless interface DALI / DALI-2 zu Bluetooth® Mesh 1.0 (Bluetooth® 4.x), Radio frequency: 2.4 GHz, Radio power: +4 dBm.

Note: please contact your consultant if you are planning to use the luminaire in environments with chemical pollutants, high or condensing humidity and major variations in temperature.

Dimensions: 1100 x 92 x 90 mm
Luminaire input power: 44 W
Luminaire luminous flux: 5070 lm
Luminaire efficacy: 115 lm/W
Weight: 1.51 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:5070 lm
  • Luminaire efficacy*:115 lm/W
  • Colour Rendering Index min.:80
  • Ballast:1 x 28001250 LCA 75W 250-550mA one4all lp PRE
  • Correlated colour temperature:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L80 50000h at 25°C
  • Luminaire input power*:44 W Power factor = 0.89
  • Dimming:MWBM dimmable to 1%
  • Radio definition: Wireless interface DALI / DALI-2 zu Bluetooth® Mesh 1.0 (Bluetooth® 4.x)
  • Radio frequency: 2.4 GHz
  • Radio power: +4 dBm
  • Maintenance category:E - Dust-proof IP5X
  • LED
  • CE
  • D
  • ENEC11
  • Food
  • GLedReP
  • 850°
  • Hfree
  • IK08
  • IP66
  • LLedReP
  • SC1
  • Ta=-20°C_to_30°C


Photometric configuration


Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
Step 2: Room Data
Step 3: Result