Aquaforce Pro / AQFPRO L LED6400-840 PC MB HFI E3

93941747

Data Sheet

An IP66, dust and moisture resistant LED luminaire. DALI/DSI dimmable DALI dimmable Self contained luminaire, manual test (3 hours). With medium beam distribution. Class I electrical. Canopy: light grey polycarbonate. Diffuser: high transmission opal polycarbonate with refraction prisms. Patented snap-on mechanism EasyClick for clipless mounting of diffuser. For surface or suspended mounting. Quick-fix brackets supplied for surface mounting. Suitable for ceiling or wall (both vertically and horizontally). Approved for indoor use or in canopied outdoor areas (see installation instructions). Mounting kits for conduit, chain suspension and catenary suspension are available as accessories. ambient temperature: 0°C to +25°C. Complete with 4000K LED..

Note: please contact your consultant if you are planning to use the luminaire in environments with chemical pollutants, high or condensing humidity and major variations in temperature.

Dimensions: 1600 x 92 x 90 mm
Luminaire input power: 48.4 W
Luminaire luminous flux: 6610 lm
Luminaire efficacy: 137 lm/W
Weight: 2.59 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:6610 lm
  • Total emergency luminous flux:600 lm
  • Luminaire efficacy*:137 lm/W
  • Colour Rendering Index min.:80
  • Ballast 1:1 x 28000655 LCA 50W 100-400mA one4all lp PRE
  • Ballast 2:1 x 89800581 EM converterLED BASIC 204 MH/LiFePO4 250
  • Correlated colour temperature*:4000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L80 100000 h at 25 °C
  • Luminaire input power*:48.4 W Power factor = 0.97
  • Dimming:HFI-X dimmable to 1%
  • Maintenance category CIE 97:E - Dust-proof IP5X
  • LED
  • CE
  • D
  • ENEC11
  • Food
  • GLedReP
  • 850°
  • Hfree
  • IK08
  • IP66
  • LLedReP
  • SC1

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)