Altis

Installation and Mounting

Stirrup fixed using different fixation points (one M20 screw or two M14 screws). Frame fixed to stirrup with M10 Hex screw and M8 set screw with the possibility to move (100mm) the position horizontally (available only on 3 bricks version). Tiltable LED modules fixed on frame. Reversable stirrup allows hang down position and different moutning configurations including suspension.
The LED modules are pre-wired to a distribution box. Gearbox installed remotely up to 200m far from the luminaire and equipped with four different cable glands - 1 x M25 cable gland accepting cable diameter between 10 mm and 12 mm and wiring with screw terminals for wires up to 4mm² for mains supply (120÷277V AC or 200-440V / 50÷60Hz), 2 x M16 cable glands accepting cable diameter between 5 mm and 10 mm for control IN/OUT and 1xM32 cable gland accepting cable diameter between 13 mm and 21 mm wiring with screw terminals for wires up to 4mm² (one cable of 7-cores at length of customer choice not supplied by Thorn and used for electrical connection the luminaire) – and LED signal to indicate the status of the gearbox. Four holes in the angles allow different mounting options. Precision aiming device available and adjustable on top or bottom of LED module.

Specification

To specify state:
High power LED floodlight for sport lighting and high mast area lighting. The floodlight offers a wide range of CCT/CRI/TLCI (4000K and 5700K, CRI from 70 to 90+ and TLCI up to 90+) to cover all the applications needs and flicker free operation suitable for HDTV broadcasting. The floodlight allows to mix the optics and has tiltable LED modules to optimize lighting designs and minimize number of floodlights in an installation. Compact floodlight (30,7kg for three bricks version, 19kg for two bricks version and 9kg for 1 brick version), highly resistant (IP66, IK08), available with 8 excellent lighting distribution. To be completed with compact (560x150x120mm including cable glands) and light (6,1kg) gearbox IP66 with DMX RDM or DALI control interface. Its housing made of die-cast aluminum with “fishbone” fins to guarantee a better thermal management in every single position and a full working range at ambient temperature -40°C/+45°C Equipped in the frontal panel with four different cable glands - 1 x M25 cable gland accepting cable diameter between 10 mm and 12 mm and wiring with screw terminals for wires up to 4mm² for mains supply (120÷277V AC or 200-440V / 50÷60Hz), 2 x M16 cable glands accepting cable diameter between 5 mm and 10 mm for control IN/OUT and 1xM32 cable gland accepting cable diameter between 13 mm and 21 mm wiring with screw terminals for wires up to 4mm² (one cable of 7-cores at length of customer choice not supplied by Thorn and used for electrical connection the luminaire) – and LED signal to indicate the status of the gearbox. Lifetime greater than 50khrs. Surge level 10kV for Common mode and differential mode. Hot restrike and flicker-free up to 1000 frames per second (required for 100-50% output level) for HDTV camera. Can be installed on the bracket of the floodlight, inside the mast or remotely up to 200m from floodlight. Driving current must be selected according to the ambient temperature. 1050mA is the maximum driving current for indoor application (Ta 35°C).
As Thorn Altis LED.