Product Finder

E/Fact

  • E/Fact
  • E/Fact

A series of square or circular recessed walk-over luminaires compliant with EN60598-2-13: limited surface temperatures

  • Designed in accordance with the new contact temperature norm: <100°C for conventional versions and <40°C for LED versions.
  • Sealed to IP67 with die-cast aluminium body. Wide choice of sizes, frames, mounting depths, light sources and control technologies to suit application
  • Tilting angle adjustment for semi-frosted glass versions (except for asymmetrical light distributions A/S)
  • Integral power supplies. All versions are pre-wired with resined cables for improved waterproofness and speed of installation

Materials and Finish

Bodies: die-cast aluminium, ENAB44100 (copper free) with powdered paint finish for high corrosion resistance.
Frame: Stainless steel AISI 316L (2mm thick) treated against corrosion or painted aluminium ENAB44100 (copper free).
Retaining screws: stainless steel
Front glass: toughened semi-frosted or frosted sodic glass.
Glass thicknesses:
E/Fact 00: 8mm.
E/Fact 0: 8mm.
E/Fact 1: 10mm.
E/Fact 2: 12mm.
Gasket: anti-ageing silicon
Recessing box: polypropylene
Cable: (H07RN-F 3x1,5mm²) min. 0,4m long for all sizes.
Dome window attachments: painted aluminium ENAB44100 for Efact0 round versions only.
Anti-slip glass on request.
Holographic films: non-yellowing polycarbonate.
All versions have integral power supply but not dimmable.

Installation and Mounting

In-ground installation:
Luminaire delivered complete with body, recessed box, frame and glass.
For outdoor applications, 30cm drainage gravel or any equivalent drainage system must be used beneath the housing to ensure water evacuation. The recessed box can be embedded in asphalt with good drainage once the temperature of the asphalt is approximately 80°C.
Luminaire must be operated for 45 minutes without its front glass to avoid moisture building-up inside the housing.
In accordance to the norm EN60598-2-13, the maximum static load is 1000kg.
Glow wire is 750°C.
Ceiling or wall installation:
Due to clips and safety cable accessories (to be ordered separately), all E/Fact versions with aluminium frame can be installed in ceiling with ceiling kits (to be ordered separately). Only E/Fact 0 and E/Fact 00 can be used in wall.
Colour change RGB lighting technology available integral in E/Fact 2. For RGB versions, LEDs are driven by DMX control (not supplied).
To facilitate quick installation, the wiring can be done via IP68 wiring connectors (SAP codes 96260810, 96260809 and 96272068). For through wiring, IP67 connection boxes can be used (SAP codes 96257909 and 96257908).
Holographic film set up: open the front glass and insert the holographic film under the glass thanks to the gasket with the smooth side of the film in contact of the glass. Rotate the film to obtain the required light effect.

Specification

To specify state:
Square and round recessed, low temperatures, walk-over luminaires with integral transformer, 4 pre-wired sizes. Polypropylene recessed box and flat stainless steel/flat or dome windows painted aluminium frames. Die-cast aluminium body sealed to IP67. Choice of lamp types/LED versions. With a choice of 3 monochromatic colours for size 00, 0, 1 and 2. Dynamic RGB versions for size 2 driven by DMX driver (included). Other DMX components ordered separately.
For ground installation with front semi-frosted flat glass enclosure for illumination or frosted glass/dome/dome windows for guidance.
As Thorn E/Fact.

New Product
LumExpress Product
eControl Product

E/Fact 00 LED Square

DescriptionLuminaire power (W)Luminaire output (lm)   TypeWt (kg)SAP Code
EFACT C00 1L35 ACC 24D 832 AL SF291LED0.7296271714
EFACT C00 1L35 ACC 24D 832 RS SF291LED0.7896271715

E/Fact 00 LED Round

DescriptionLuminaire power (W)Luminaire output (lm)   TypeWt (kg)SAP Code
EFACT R00 1L35 ACC 7D 832 RS SF387LED0.6896271572

E/Fact 0 LED Square

DescriptionLuminaire power (W)Luminaire output (lm)   TypeWt (kg)SAP Code
EFACT C0 1L50 SOFT 840 RS FR237LED1.5196271584
EFACT C0 3L50 ACC 22D 840 AL SF6346LED1.5696271724

E/Fact 0 LED Round

E/Fact 1 LED Square

DescriptionLuminaire power (W)Luminaire output (lm)   TypeWt (kg)SAP Code
EFACT C1 4L50 SOFT 840 AL FR668LED3.5996271622
EFACT C1 4L50 SOFT 840 RS FR668LED3.7296271623
EFACT C1 5L90 ACC 28D 832 RS SF16887LED4.0296271739
EFACT C1 5L90 ACC 28D 840 RS SF16976LED4.0296271741

E/Fact 1 LED Round

DescriptionLuminaire power (W)Luminaire output (lm)   TypeWt (kg)SAP Code
EFACT R1 4L50 SOFT 832 AL FR664LED2.9996271634
EFACT R1 4L50 SOFT 832 RS FR664LED2.9996271635
EFACT R1 4L50 SOFT 840 AL FR664LED2.9996271636
EFACT R1 4L50 SOFT 840 RS FR664LED2.9996271637

E/Fact 2 LED Square

Description   Wt (kg)SAP Code
EFACT C2 7L50 ACC 22D RGB DMX AL SF6.8196271674
EFACT C2 7L50 ACC 22D RGB DMX RS SF6.9596271675

E/Fact 2 LED Round

DescriptionLuminaire power (W)Luminaire output (lm)   TypeWt (kg)SAP Code
EFACT R2 7L50 ACC 22D RGB DMX AL SF10316LED6.0096271704
EFACT R2 7L50 ACC 22D RGB DMX RS SF10316LED6.1396271705
EFACT R2 9L50 SOFT 832 RS FR12133LED5.7396271701
EFACT R2 9L50 SOFT 840 AL FR12115LED5.6096271702
EFACT R2 9L50 SOFT 840 RS FR12115LED5.7396271703

E/Fact LED holographic films

E/Fact Accessories