High power LED floodlight for area lighting applications
- Excellent control of obtrusive light (0cd at 90°)
- Flexible optical system optimising lighting distributions for best in class results
- Compact and low weight for minimal structural costs
- Fully controllable solution enabling instant light and stepped illumination levels
Materials and Finish
Body : die-cast aluminium (EN AC-47100), painted dark sandy grey (close to RAL 7043)
Frame and stirrup : die-cast aluminium (EN AC-44100), painted dark sandy grey (close to RAL 7043)
Glass: 5mm toughened, meeting requirements of CEI 60598-2-5
Screws: stainless steel
Installation and Mounting
Suitable for mast mounting. Stirrup fixed by a single bolt through Ø22mm hole or 105x17mm oblong hole, or by twin bolts through Ø15mm hole. Reversible stirrup allows hang down position. Frame fixed to stirrup with M10 Hexa screw and M8 set screw. Tiltable LED modules fixed on frame with M8 screws and M5 set screw. The LED modules are pre-wired with a 1m long cable and connected to a single harness. Electrical connection to the floodlight is done via a single multi-core cable (female connector supplied for quick plug-in connection) ; gear tray IP21 or gear box IP65 are installed remotely and supplied separately.
To specify state:
High power LED floodlight for high mast area lighting. The floodlight is installed horizontally to avoid obtrusive light (0cd at 90°) and has tiltable LED modules to optimise lighting designs and minimise number of floodlights in an installation. Compact floodlight (26kg), highly resistant (IP66, IK08), available in 2 versions for excellent optical performance at both Ta25° and Ta35°C.
As Thorn Altis Area.