Home / Products / Indoor Lighting / Direct/Indirect and Surface Luminaires / Prisma / Prisma LED / PRISMA LED HF 4200 FR SLDMD BASIC L840


96220713 / PR4200ZS4K

Data Sheet

Slim surface mounted LED luminaire. Electronic, fixed output control gear. Class I electrical, IP44. Body: white painted galvanised steel sheet. End caps: white plastic. Diffuser: frosted acrylic. Keyhole fixing positions Ø14mm for direct mounting to ceiling, wall or brackets. Fixing centres: 795mm. Two cable entries Ø19mm in the rear of the body. Grommets included. Electrical connection via 5 x 2 x 2.5mm² piano key terminal block. Fitted with high frequency sensor with on/off function for mounting height of up to 4m. This luminaire is suitable for small areas where one luminaire is sufficient. Please be aware, if used at maximum sensitivity, the sensor can detect through windows, doors and thin walls. The luminaire is not recommended to be placed outdoors or where material is moving, neither should it be exposed to vibrations. IP44 dust and moisture proof body extends application to canteens, cafeterias and kitchens. For stand-alone operation only. Complete with 4000K LED

Dimensions: 972 x 167 x 64 mm
Total power: 38.9 W
Weight: 3.2 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:4183 lm
  • Luminaire efficacy*:108 lm/W
  • Lamp efficacy:108 lm/W
  • Chromaticity tolerance (initial MacAdam)*:4
  • Rated median useful life*:50000h L70 at 25°C
  • Ballast:1x HF_ Xitanium
  • Luminaire input power*:38.9 W Lambda = 0.9
  • Dimming:Fixed output
  • Maintenance category:D - Enclosed IP2X
  • LED
  • CE
  • D
  • EN 55015
  • 650°
  • IP44
  • SC1


Photometric configuration


Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
Step 2: Room Data
Step 3: Result