96238636 / CO235ZSCL

Data Sheet

High performance IP44 surface mounted fluorescent luminaire for 2 x 35W T16 lamp(s) with electronic - fixed output circuit. Body in white painted steel, endcaps in white polycarbonate with a curved, precision extruded clear prismatic polycarbonate diffuser. Ø21.5mm cable entry hole in the centre of the back spine with optional cable entry through each end cap. Fitting supplied with sealing grommets and innovative "quick fix" horseshoe and sliding washers for direct screw fixing to surface, fixing centres 1450mm. Standard BESA fixings. Can be suspended using wire suspension accessory kit (to be ordered separately). Easy to remove gear cover to protect and cover all components. 5 x 2 x 2,5mm² piano key terminal block. Fitted with high frequency sensor with on/off function, range from 0.5m to approximately 4m at a ceiling height of 2.4m, switch off delay from 2 to 30 minutes, twilight photocell 2-2000 lux, coverage 360° with an opening angle of 160°. Please be aware, if used at maximum sensitivity, the sensor can detect through windows, doors and thin walls. The luminaire is not recommended to be placed outdoors or where material is moving, neither should it be exposed to vibrations. IP44 dust and moisture proof body extends application to canteens, cafeterias and kitchens. Lamps to be ordered separately.

Dimensions: 1520 x 217 x 90 mm
Total power: 75.5 W
Weight: 4.4 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:2 x T16 / 35W
  • Luminaire luminous flux*:5168 lm
  • Lamp luminous flux:2 x 3300 lm
  • Luminaire efficacy*:68 lm/W
  • Lamp efficacy:87 lm/W
  • Colour Rendering Index min.:80
  • Ballast:1x HF Tridonic PC T5 PRO LP
  • Luminaire input power*:75.5 W Lambda = 0.99
  • Maintenance category:D - Enclosed IP2X
  • T16
  • CE
  • ENEC*
  • 850°
  • IK05
  • IP44
  • SC1


Photometric configuration


Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
Step 2: Room Data
Step 3: Result